 |
 |
|
|
 |
 |
 用途: |
對於不易接近的場所, 降低火災的風險是非常重要的. 鑫永銓提供了不同的耐燃配方供客戶選擇, 此面膠配方可適用於NN, EP ARAMID之輸送帶
火焰持續時間:
將一完整厚度的皮帶試片置於1000+ 100oC的火焰中持續燃燒1分鐘, 移開火源後再測量火焰持續的時間
火焰再現性試驗:
在移開火源後60+10秒, 以每秒1.5米的風速由右向左吹向試片, 不會發生殘火復燃的現象
抗靜電測試:
表面電阻不超過3x108
滾輪摩擦試驗:
以滾筒連續摩擦3小時, 皮帶不會出現火花或火焰, 滾筒表面溫度不超過325度 |
 |
| |
| Type of fire resistant conveyor belt: |
| Type |
Applicable standard |
Specified item for test |
Duration of
flame |
Reapperance of flame |
Requirement |
| FR-500 |
CNS
JIS |
Flame duration time per "Flame Test with Cover Rubber" |
Within 60 Seconds
(Average of 3 pcs.) |
Not permitted. |
Extinguishes as the flame s removed. Reignition of fire by air-blow should not occur |
| FER-514 |
BS
AS
IS
SABS |
Duration time of Flame and Glow per "Flame Test with Cover Rubber" Whether or not there is heat generation and fire ignition per "Drum Friction Test" "Electric resistance on belt surface" |
Less than 45 sec. (A total of six)
Less than 15 sec.
(each test) |
| EMR |
Duration time of Flame and Glow per "Flame Test with Cover Rubber" Whether or not there is heat generation and fire ignition per "Drum Friction Test" |
| MSHA |
Duration time of Flame and Glow per "Flame Test with Cover Rubber" |
ISO
DIN
NF |
Flame duration time per "Flame Test with and without Cover Rubber" "Electric resistance on belt surface" |
|
|
| Rubber |
Composition |
Application |
| FOER |
Fire Resistant + Oil Resistant |
Cover rubber with high conductivity, applied to materials with static on its surface, or materials that have fire risk by spark or glow.
For example coal, wood etc. |
|
|
|
鑫永銓股份有限公司
總公司:南投市南崗工業區南崗三路294號
Tel: 886-49-2263888 / Fax: 886-49-2263168
E-mail:hyc@hyc-group.com |
|
|
|
|
